Bang & Olufsen BeoCom 6000 - User Guide - Manual (Page 40)

Preference settings
The Settings menu contains several options which allow you to
adjust BeoCom 6000 functions.
To choose settings in the menu …
Press to bring up the main menu
Turn the wheel to display Settings and press OK
to bring up the menu
Turn the wheel until the desired option is
displayed, such as Clock
Press to bring up the menu
Turn the wheel to select a setting and press OK
to store it
The Settings menu options
Ringer … This menu contains three separate
ringer settings:
– Ringer on/off lets you switch the ringer on or
off, and set a time period in which the phone
will not ring. If you switch off the ringer, the
phone does not ring, but it does register
incoming calls in the Caller ID list. The ringer is
disconnected until you change the setting.
– Ringer level lets you set the ringer volume.
Options are Extra low, Low, Medium or High.
The ringing signal selected is played after a
moment.
– Ringer melody lets you choose from eight
melodies. The ringing signal selected is played
after a moment.
OK
Settings
OK
Clock
OK
Set year
2005
OK
40
When you browse through the
Settings menu, the current settings
for each option are shown in the
display. For example, when you
browse to the Clock option, the
current time and date appear on
the second line of the display.