Baumfolder BaumCut 31.5 (For serials 78N1001 thru 700N100) - Manual (Page 101)

K8 - 3
1 2 3 4 5 6 7 8 9
C 0
x D i
PROGRAMMABLE
A
B
C
HYDRAULIC
We recommend to have oil changed and unit checked by
BAUM and/or authorized personnel.
Attention when bleeding hot oil - danger of burning!
Oil change: approx. every 6000 hrs.
Fill in oil up to middle of oil level indicator!
Quantity (liters): 28
GUIDINGS FOR KNIFE AND CLAMP (grease lubrication)
Lubrication by grease gun!
1. Move backgauge to position 47,5 cm (18.7 inches)!
2. Remove lid (C) at backgauge drive guard
3. Grease spindle via lubricating nipple
2 - 3 strokes with the grease gun are sufficient.
Lubrication intervals: monthly
Lubrication by grease gun!
1. Lubricate guidings for knife bar (A) from the front side:
2 lubricating nipples at the front plate
2. Lubricate clamp guidings from the rear side (B):
2 lubricating nipples
2 - 3 strokes with the grease gun are sufficient.
Lubrication intervals: weekly
BACKGAUGE DRIVE (grease lubrication)
Usable oil brands (DIN 51524, in alphabetical order):
ARAL Vitam GF 46
AGIP Oso D 46
BP Energol HLP-HM 46
CASTROL Hyspin SP 46
ESSO Nuto H 46
FINA Hydran 46
FUCHS Renolin B 15
KLÜBER Lamora HLP 46
MOBIL DTE 25
SHELL Tellus 46
TOTAL Azolla ZS 46
Usable grease brands (DIN 51825, in alphabetical order):
ARAL Radlagerfett
AGIP Autol Top 2000
BP Energrease LS-EP 2 or
BP Energrease LZ 2
CASTROL LM 2
ESSO Unirex N2
FINA Pluton AX 2
KLÜBER Centoplex 2 EP
MOBIL Mobilgrease XHP 222
SHELL Retinax LX 2
TOTAL Multis EP 2