Baumfolder BaumCut 31.5 (For serials 78N1001 thru 700N100) - Manual (Page 13)

K1 - 5
1 2 3 4 5 6 7 8 9
C 0
x D i
PROGRAMMABLE
Energy
lead wire
Front side (Operating side)
Power Supply
1.0 Technical Data / Machine Layout / Transport and Installation of the Machine / Safety Relevant Machine Elements
The machine is to be connected by an authorized
electrician, only!
Connect machine according to diagram!
Energy supply is made from the rear of the machine.
Power supply is located within the connection box; access via front guard.
• When the system is operated with residual current breaker, use a residu-
al current breaker ( > 30 mA ) for each machine!
• All the cables marked with a symbol, as well as any cables with
orange sheath are still alive even if the main switch has been shut off.