Technical data – Baumfolder BaumCut 31.5 (For serials 78N1001 thru 700N100) User Manual
Page 19
K1 - 11
1.0 Technical Data / Machine Layout / Transport and Installation of the Machine / Safety Relevant Machine Elements
Technical Data
Cutting width
80 cm / 31
.5"
Clamp opening
10 cm / 3
.93"
Feed depth
80 cm / 31
.5"
Power requirement (main motor):
3 phase
4,2 kW / 5
.4 H.P.
Net weight
900 kg / 1983 lbs
Width
155 cm / 61"
Length
197 cm / 77
.5"
Height
155 cm / 61"
Front table length
67 cm / 26
.4"
Table height
90 cm / 35
.4"
Clamp pressure, min.
180 daN / 397 lbs
max.
2700 daN / 5950 lbs
Knife thickness
11,75 mm / 0
.4"
Grinding reserve (HSS 18 knife), max.
2,5 cm / 1"
Smallest cut
without false clamp, min.
1,5 cm / 0
.6"
with false clamp, min.
5 cm / 1
.96"
Backgauge speed
0 - 13 cm/sek.
Knife speed/min.
20
Voltage supply (3 phase) 200 - 240, 50/60Hz
Fusing
3 x 20A
Attention!
The wire cross section of the main power supply according to the countrys
regulations.
Same regulations according the plug connectors.
Noise emission
(Metering of noise level according to EN 13023, LpA (dB)): 76,5
Extraneous and room noise correction has been carried out.
daN = kp