Baumfolder BaumCut 31.5 (For serials 78N1001 thru 700N100) - Manual (Page 27)

K3 - 3
3.0 Start Up
Program Data Display
A
B
After switching on, the "Program Data Menu"* appears on the screen.
It shows among other things...
on the upper screen (A): ACTUAL POSITION
on the lower screen (input field, B): NOMINAL POSITION
The actual position (A) shows the real backgauge position in mm, cm, inches or
sun = 1/10 shaku (Japan).
Measurement system can be changed - see "Function Survey, page K5B - 3"
* If this fails, see Malfunctions/Breakdowns, page K7 - 5.
Measurement Display and Measurement System