Chapter 4 maintenance, Cleaning, Charging batteries – Bird Technologies 5000-EX User Manual
Page 31: Maintenance
 
19
Chapter 4
Maintenance
Cleaning
Clean the Bird Digital Power Meter and its display 
with a soft cloth dampened with mild detergent and 
water only. Clean sensors with a dry cleaning solvent 
that leaves no residue.
Charging Batteries
Fully charged batteries provide about 20 hours of con-
tinuous operation with the Bird WPS, 50 hours with 
other sensors. Charging time is typically 8 hours using 
the ac adapter. The batteries charge whenever the 
DPM is connected to ac or dc power sources, using 
either the ac Mains adapter or the automobile ciga-
rette lighter adapter. When the external adapter is 
connected, the battery level indicator will blink until 
the battery is fully charged. When using the internal 
batteries, the indicator will be on continuously and the 
black bar will show the battery change remaining. The 
unit will charge with its power turned either on or off.
Note:
For optimum battery life, only
charge the batteries after the battery level indi-
cator empties completely and begins to blink.
CAUTION
Do not use harsh or abrasive detergents for cleaning.