Bird Technologies 5000-EX - Manual (Page 33)

Maintenance
21
Erratic power
readings Element
contact out of
alignment
(DPS) Align the contact. It must
be far enough out to
make good contact with
the element, but must
not restrict entry of the
element body.
Damaged
element (DPS) Replace element.
Sensor has lost
its zero (TPS) Rezero sensor.
Sensor is
damaged Replace sensor.
Unit will not
turn ON Unit is using ac
power adapter
and was turned
OFF while the
back light was
illuminated. Disconnect the ac
adapter connector from
the unit and wait for at
least 30 seconds, then
turn the unit ON.
PROBLEM
POSSIBLE
CAUSE
REMEDY