Blakeslee UC-20 - Manual (Page 13)

12
TROUBLESHOOTING
Problem
Possible
Cause
Corrective
Action
Dishwasher does not run Main power off Check breaker panel
Dishwasher does not fill
Main water off Open supply valve
Rinse nozzles clogged Clean rinse nozzles
Solenoid filter clogged Clean filter
Lime build-up De-Lime rinse line
Defective pressure switch Replace pressure switch
Indicator light flashing and/or error code
is displayed on screen
See error codes
Poor wash results
No detergent supplied Add detergent supply
Ware loaded incorrectly Load ware correctly
Clogged spray arms Clean spray arms
Detergent dispenser defective Contact factory
Wash water dirty Drain and refill tank
Insufficient wash time
Select a longer wash mode or repeat
cycle
Low water temperature Contact factory
Foam developing
Use a low suds detergent or reduce the
amount of rinse aid by adjusting the
dispenser screw
Clogged sump filter Clean sump filter
Streaks and spotting on
dishes and glasses
Too much rinse aid being dispensed
Reduce the amount of rinse aid by
adjusting the dispenser screw
Water too hard Contact detergent representative
Clogged rinse nozzles Clean rinse nozzles
Insufficient flow pressure
Increase incoming flow pressure to
20-25 psi