Blakeslee UC-20 - Manual (Page 9)

8
OPERATION
Preparing the Dishwasher for Use
1. Ensure that all spray arms spin freely and that scrap filter is properly installed.
2. Close dishwasher door.
3. Turn on main water supply to dishwasher.
4. Turn on main power supply to dishwasher.
5. Press dishwasher Power On/Off switch to fill dishwasher. Blue indicator light will appear.
6. The default language that appears on the display screen is set to English. The default
temperature that appears on the display screen is set to Fahrenheit. To change either one of
these settings, press and hold the Select Cycle Up and Down Keys simultaneously for fifteen
seconds. This will prompt the dishwasher into a setup screen.To change language, press the
Select Cycle Down Key until the desired language appears on the display screen. Press the
Select Cycle Up Key to save language setting. Repeat for temperature setting. When all
selections have been made, depress the Start/Enter switch to exit the setup screen.
7. Load Washer (see proper procedures for scraping and loading ware)
8. Close dishwasher door.