Brandmotion 9002-8538 - Manual (Page 6)

INSTALLATION
INSTRUCTIONS
8538 Instructions 5-27-14.docx Page 6 of 9
Step 2: Place Camera Mount in desired position to
confirm fitment. (IMPORTANT: Some states
prohibit items blocking the vehicle license plate;
check local authorities to confirm legal status for
your specific application).
Step 3: Peel adhesive backing from supplied
Camera Mount Template and apply to the desired
location making sure that the camera direction is
correct.
Step 4: Use a Center Punch to mark the centers of
the required three holes and drill three pilot holes
NOTE: If self-adhesive Template is missing or
damaged, cut out the image above and affix
with Masking Tape.