Brandmotion 2000-3802 - Manual (Page 5)

Section 1: Chevy Silverado/GMC Sierra Instructions, 2007 – Current
2000-3802 Instructions 10-11-12.doc Page 5 of 15
9. Connect the male 16-pin and 14-pin connectors from
the DPS harness to the vehicles harness. (Figure 6)
Figure 6
10. Connect the female end of the 16-pin and 14-pin
connector from the DPS harness to the back of the radio
head unit. (Figure 7)
Figure 7
11. Connect the two white connectors to the DPS module.
(Figure 8)
Figure 8
12. Connect the DPS turn-on switch to the remaining
connector on the DPS harness. (Figure 9)
Figure 9
13. Reconnect negative battery cable.
14. Place DPS module with the Bongiovi DPS Acoustics
side face down. Confirm the DPS unit’s dip switches are
all set to the down position – “DDDDD”. (Figure 10)
Figure 10
15. Turn vehicle ignition key to “ON” position. Turn on
radio head unit for 10 seconds. (Note: There should be
no sound from the speakers). Disconnect white 4-pin
connector from back of DPS module. (Figure 11)
Figure 11