Brandmotion 2000-3801 - Manual (Page 6)

Section 2: Buick Regal Instructions, 2011 – Current
2000-3801 Instructions 10-10-12.doc Page 6 of 24
1. Ensure all radio functions are working properly, return all
Treble, Bass, Fade, and Balance to neutral settings and
remove any CDs to avoid possible jam before
disassembly.
2. For vehicles equipped with automatic transmissions, place
shifter in the N (neutral) position and set parking brake.
3. Loosen the negative battery cable bolt. Remove negative
battery cable from terminal and position away from
battery.
4. Carefully remove highlighted trim using a plastic trim
tool. (Figure 1)
Figure 1
5. Using a plastic trim tool, gently remove upper IP display
surround. (Figure 2)
Figure 2
6. Using a 7mm socket, remove 4 bolts attaching radio
faceplate unit and remove. (Figure 3)
Figure 3
7. Using a 7mm socket, remove 4 bolts attaching radio head
unit. (Figure 4)
Figure 4
8. Pull radio head away and disconnect 44-pin connector
from the back of radio. (Figure 5)
Figure 5