Brandmotion 2000-3851 - Manual (Page 2)

INSTALLATION INSTRUCTIONS
2000-3851 Instructions 11-13-12.doc Page 2 of 2
Step 1: After installing the DPS kit, setting the
vehicle specific dip switch settings, and confirming
unit function, disconnect DPS Harness from DPS
Module.
Step 2: Plug DPS Harness into A/B Demo Box.
Step 3: Plug A/B Demo Harness into DPS Module.
Step 4: Test A/B Demo kit function. Turn ignition
switch to ON.
Step 5: With the A/B Demo Box switch in the UP
position, the LED is OFF, and the box is in bypass
mode allowing on the factory sound system to play.
Step 6: With the A/B Demo Box switch in the
DOWN position, the LED is ON, and the sound
system signal will be processed through the DPS
Module.