Bully Dog 53153 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 5)

4
RFI COLD AIR INTAKE
Black Oxide Pan Head
Screws
Bully Dog provides screws
to secure the MAF sensor to
the air intake tube.
T20 Security Torx® Bit
The mass air flow sensor is
attached to the stock intake
tube using tamper resistant
pin-in-Torx® screws. Bully
Dog includes a Torx® bit for
convenience. If the bit is lost it can be purchased at any auto
parts store.
Nylon Washer
These nylon washers protect
the mass airflow sensor and
prevent it from being bent
when it is attached to the air
intake tube.
MAF Replacement O-Ring
Meant to replace the
orange O-Ring beneath the
stock MAF sensor, this ring
ensures a tight seal between
the MAF sensor and the
Bully Dog intake tube.