Calculated Industries 4095-C User Guide - Manual (Page 26)

U
ser
’
s
G
Uide
— 27
USinG THE PiPE TRadES PRo
Pipe Material Key
The Pipe Material key lets you choose a pipe material, which
defines the available sizes and surface roughness used by the
calculator. See Appendix A on page 53 for more information.
The default material for the Pipe Trades Pro is Steel, but the
user can choose from material types as shown.
KEYSTROKE DISPLAY

 0.
 (Steel) MATL StEEL
 (Stainless Steel) MATL S.StEEL
 (Brass) MATL brASS
 (Aluminum) MATL AL.
 (Cast Iron) MATL CASt

(Plastic) MATL PLAStIC
 (Copper) MATL COPPEr
The last material setting displayed is selected, and the
calculator will retain your setting even after the power has been
turned off. Once a material is selected, you can easily toggle
through the available types (Schedules, etc.) using the Pipe
Type function (  ). Available types of pipe are dependent
upon the material setting.
Keystrokes below show the pipe types available for Plastic
(press  until “PLAStIC” is shown in the display).
KEYSTROKE DISPLAY
 
0.
  MATL PLAStIC
  (Schedule 40) TYPE 40 PLAStIC
(cont'd)