Calculated Industries 4095-C User Guide - Manual (Page 33)

34 — P
iPe
T
rades
P
ro
™
KEYSTROKE DISPLAY

 ALL CLEArEd
1. Enter Offset:
2
4   OFST 24 INCH
2. Enter bend angle:
4
5  /_Ø 45.00º
3. Enter the Roll and calculate the pipe length:
4
   LNTH 34-7/16 INCH
Continue pressing the Travel key to view all related values.
Rolling Offset – Unknown Bend Angle
Find the center-to-center travel for a rolling pipe offset with a 6
1/2” Roll, a 17” Offset, and an advance of 28”. The bend angle
is unknown. This example assumes factory made long radius
butt weld elbows will be used to create degreed fittings.
ADV
ANCE
LENGTH
OFFSE
T
ROLL
BEND
KEYSTROKE DISPLAY

 ALL CLEArEd
1. Enter Offset:
1
7   OFST 17 INCH