Calculated Industries 4095-C User Guide - Manual (Page 37)

38 — P
iPe
T
rades
P
ro
™
Calculate Take-Out and Butt Weld Elbow Cut Marks
The Take-Out function can be used to quickly solve a Take-Out
and butt weld elbow cut marks for a known bend angle and
Pipe Size.
Find the arc lengths for an odd bend angle of 37° for 12” pipe.
Note: All Take-Out calculations are based on Standard type
steel pipes. O.D. See the Cut Length – Known Take-Out
Value example to solve Cut Lengths for known Take-Out
values.
37°
ANGLE
C
EN
TE
R
AR
C
IN
SI
D
E
A
RC
O
U
TS
ID
E
AR
C
KEYSTROKE DISPLAY

 ALL CLEArEd
1. Enter the Pipe Size:
1
2   STD SIZE 12 INCH
2. Enter the known bend angle:

7  /_Ø 37.00°
3. Calculate the Take-Out and Arc Lengths:

 TO 6 INCH

IARC 7-1/2 INCH

CARC 11-5/8 INCH

OARC 15-3/4 INCH
Continue pressing the  key to view all related values.