DJI Z15-5D - Manual (Page 22)

©2013 DJI Innovations. All Rights Reserved.
22
Trouble Shooting
NO. What Why How to
1
The gimbal keeps drifting
after initializing
(1) Too much TX trim
(2) The GCU and flight control
system is disconnected
(3) The Z15 mounting
direction is not aligned to the
aircraft nose
(1) Adjust the TX trims
(2) Connect the GCU and flight
control system
(3) Ensure the Z15 mounting
direction is aligned with the
aircraft nose
2
The gimbal is abnormal
after initializing
Abnormal calibration after
manufacture
Please contact the local dealer or
DJI Innovations customer service
3
Cannot distinguish the
gimbal direction when in
use
BVR flight
Switch to the FPV Mode first, then
to another Working Mode needed
4
The gimbal green LED is on
but without video display
(1) The wireless video
transmission unit has been
disconnected
(2) Wrong power supply for
wireless video transmission
unit
(1) Check the wireless video
transmission unit connection