In box, Gimbal & gimbal controller unit (gcu) gimbal × 1, Gimbal controller unit (gcu) × 1 – DJI Z15-5D User Manual
Page 4: Main parts package lens retaining ring × 1, Mounting bracket × 4, Mounting board for receiver × 1, Cable clamp
©2013
DJI Innovations. All Rights Reserved.
4
In Box
Gimbal &
Gimbal Controller Unit (GCU)
Gimbal ×
1
The Z15 gimbal has built-in slip rings within the mechanical structure,
which work to prevent the wire rod from entangling and enables
rotational freedom for the 3 axes rotating rods.
The gimbal has special built-in Z15 gimbal servo drive modules and
independent IMU module.
Gimbal Controller Unit (GCU)
×
1
Connect the gimbal controller unit to the flight control system with a
CAN–Bus cable. The GCU will control the gimbal’s PAN, ROLL and
TILT axes rotation.
5D
Main Parts Package
Lens Retaining Ring
×
1
For fixing the camera lens
.
Mounting Bracket
×
4
For the gimbal and landing gear connection.
Mounting Board for Receiver
× 1
For fixing the GCU and providing the mounting position for the
receiver or other device.
Cable Clamp
For tidying the cables on gimbal.