DJI Z15-5D - Manual (Page 23)

©2013 DJI Innovations. All Rights Reserved.
23
Specifications
General
Built-In Functions  Three Working Modes
 Orientation-locked control
 Non orientation-locked control
 FPV mode (Reset)
 Built-in independent IMU module
 DJI gimbal special servos drive module
 Wireless video transmission supported
 Camera shutter control supported
 Wide range voltage input supported
 S-Bus/PPM Receiver supported
Peripheral
Supported Camera CANON EOS 5D MARK II; CANON EOS 5D MARK III
Current Supported Lens CANON EF 24mm f/2.8 IS USM
GCU Input Power 4S~12S LiPo Battery
Control Requirement Four spare receiver channels at least
Assistant Software System Requirement Windows XP SP3; Windows 7; Windows 8 （32 or 64 bit）
Mechanical& Electrical Characteristics
Working Current  Static current: 200mA (@25V)
 Dynamic current: 400mA (@25V)
 Locked-rotor current: 4A (@25V)
Operating Temperature -10°C ~ 50°C
Weight 1.42Kg
Dimensions 204mm × 242mm × 264mm
GCU Weight 63g
GCU Dimensions 64.2 mm × 34.1mm × 19.5mm
Working Performance
Load Weight (Reference Value) 2615g(5D MARK II with SD Card & Battery & CANON EF 24mm
f/2.8 IS USM Lens)
2664g(5D MARK III with SD Card & Battery & CANON EF 24mm
f/2.8 IS USM Lens)
Controlled Angle Accuracy ±0.02°
Maximum Controlled Rotation Speed Pan axis:± ±90°/s