Metrohm Vision – Tutorial - Manual (Page 15)

 3 Acquiring Spectral Data
8
 NIRS Vision Tutorial – Operation
Restore Tutorial Data project
1. Click on Mode  Data Acquisition
2. Click on File  Restore  Restore Project
3. In the Select project zip file to restore dialog box,
 go to the folder C:\vision\Tutorial Data\TutProj
 Double click on open the file xdsstart.zip
 In the Preview project to be restored dialog box click on [OK]
The Project xdsstart will be unzipped and restored automatically to
your Vision software.
4. In the dialog box stating that the file has been restored successfully, click
on [OK].
Open Tutorial Data project
1. Click on File  Project  Open
2. When asked to close the open project, click on [OK].
3. When asked to switch of the lamp, click on [no].
4. In the Open Project dialog box select xdsstart and click on [Open]
You can now open any of the products in the project and display the individual
spectra. Constituent data has been entered for later exercises.