1 introduction, 1 instrument description – Metrohm 813 Compact Autosampler User Manual
Page 7
1
Introduction
813 Compact Autosampler
1
1 Introduction
1.1 Instrument description
The 813 Compact Autosampler can be used for automat-
ing different tasks, e.g. ion chromatographic determinations with
the Metrohm IC system instruments or voltammetric determina-
tions with the Metrohm 746 Trace Analyzer or 757 VA Com-
putrace . The sample rack provided may hold up to 36 vials of 2.5
or 11 mL volume respectively. Sample tubes made of polypropyl-
ene are standard. To protect the samples from external contami-
nation, the tubes can be hermetically sealed.
Sample introduction from the 813 Compact Autosampler is
achieved by means of its integrated peristaltic pump. The sample
is conveyed by the pump through the capillary into e. g. the sam-
ple loop of the injector located within an ion chromatograph. A
PEEK needle for sealed or a PEEK tube for open sample tubes
can be used alternatively.
Preprogrammed methods for the most common modes of opera-
tion allow to use the 813 Compact Autosampler directly, without
programming effort.