6 servicing the high-pressure pump, Servicing the high-pressure pump, Figure 15 – Metrohm 930 Compact IC Flex ChS/PP User Manual
Page 68: High-pressure pump – parts
5.6 Servicing the high-pressure pump
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
60
￭￭￭￭￭￭￭￭
930 Compact IC Flex ChS/PP (2.930.1300)
5.6
Servicing the high-pressure pump
Figure 15
High-pressure pump – parts
1
Pressure screw, short (6.2744.070)
Fastened to the outlet valve holder.
2
Outlet valve holder
3
Fastening screw
4
Pump head
5
Inlet valve holder
6
Pressure screw, short (6.2744.070)
Fastened to the inlet valve holder.
7
Eluent aspiration tubing connector
Consists of a coupling with a pressure
screw.
8
Pressure screw, short (6.2744.070)
Fastened to the pump output.
Maintenance interval
The following parts of the high-pressure pump have to be serviced at least
once per year:
￭
Inlet valve (6.2824.170)
￭
Outlet valve (6.2824.160)
￭
Piston seal (6.2741.020)
￭
Zirconium oxide piston (6.2824.070)
Maintenance tasks can also be carried out if the following problems occur:
￭
Unstable baseline (pulsations, flow fluctuations)