Figure 4, Connection detector – suppressor, Figure 5 – Metrohm 896 Professional Detector – Conductivity User Manual
Page 24: Connection detector – mcs, Connect the detector input capillary (4-1), Suppressor (4-2), 3) and two short peek pressure screws
Advertising
3.3 Conductivity detector
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16
￭￭￭￭￭￭￭￭
2.896.0010 896 Professional Detector – Conductivity
1
2
3
4
Figure 4
Connection detector – suppressor
1
Detector input capillary
2
Suppressor output capillary
labeled with out.
3
Coupling (6.2744.040)
4
PEEK pressure screws, short
(6.2744.070)
Connecting the detector input capillary to the MCS
1 Connect the detector input
￭
Fasten the detector input capillary (5-1) with one long PEEK pres-
sure screw (6.2744.090) (5-2) to the output of the MCS (5-3).
3
2
1
Figure 5
Connection detector – MCS
1
Detector input capillary
2
PEEK pressure screw, long
(6.2744.090)
3
MCS output
Advertising