4 stirrer operation, Stirrer operation – Metrohm 865 Dosimat plus User Manual
Page 34
4.4 Stirrer operation
■■■■■■■■■■■■■■■■■■■■■■
24
■■■■■■■■
865 Dosimat plus
3 Export the method
■
In the function bar, select Export and press [OK].
The method is being exported. The directory structure on the USB
stick is listed in chapter 5.3, page 33.
4.4
Stirrer operation
You can control a connected stirrer directly in the main dialog.
Proceed as follows:
1 Set the stirring rate
■
Use the arrow key [
↓] to select the Stirrer entry.
■
In the function bar, select the Stir- or Stir+ function.
The stirring rate will be increased or decreased by one step each
time the [OK] key is pressed.
The algebraic sign changes the direction in which the stirring is
done. When the stirrer is viewed from above, this means:
– "+": counterclockwise rotation
– "–": clockwise rotation
2 Switch on the stirrer
■
In the function bar, select the on function and press [OK].
The stirrer is started and stirs at the rate which has been set. Off is
now displayed in the function bar.
3 Switch off the stirrer
■
In the function bar, select the off function and confirm with
[OK].
The stirrer is stopped.