Metrohm VoltIC pro I User Manual
Page 9
Advertising
Application Bulletin 356
Installation instruction for «VoltIC pro I»
Page 9 of 18
Check and
– if necessary – adjust the «Port Settings» to the
following parameters of both COM ports under «Properties»
by double-clicking on each COM port:
Create a generic text printer under: «Start» «Devices and
Printers» «Add a Printer»
Add a local printer by using the first newly created COM port
(e.g. COM 14) and select the «Generic / Text only» printer
driver. Use the current version of the driver. Rename the
printer to «RS Printer».
Advertising