Metrohm 750 Autosampler - Manual (Page 35)

3 Operation
750 Autosampler
32
EDIT METHOD # N
à Delete Step
Delete program step
Allows program steps to be deleted. After <ENTER>
is pressed the following display appears:
DELETE A STEP
Enter Step Number
#N
Select program step
Entry of the number of the program step which is
to be deleted. After <ENTER> is pressed the
following display appears:
Delete Step # N?
<ENTER> to Delete
<CLEAR> to Abort
Confirmation of deletion process
<ENTER>
Delete selected program step N.
<CLEAR> Abort deletion process.
METHOD MENU
à Run Method
Running a method
Allows a method to be started. After <ENTER> is pressed the
following display appears:
Enter Method Number
# N
1 … 10
Select method
Entry of the method number N which is to be started. After
confirmation with <ENTER> the selected method is carried
out exactly as if it has been started with the <RUN/STOP>
key (details see chap. 3.6).
METHOD MENU
à Copy Method
Copy a method
Allows a method to be copied. After <ENTER> is pressed the
following display appears:
COPY METHOD
Copy FROM Method
# N
1 … 10
Source method
Entry of the method number N which is to be copied. After
confirmation with <ENTER> the following display appears:
COPY METHOD
Copy TO Method
# M
1 … 10
Target method
Entry of the method number M which is to be overwritten
with the selected source method. After confirmation with
<ENTER> the method will be copied provided that the
target method is empty.
If the target method already contains program steps then the
following safety inquiry will appear: