Belkin UCSPRO-RM2 User Manual
Page 13
LTO
LTO
TM
12
Select MODE
NEXT
> ENTER.
First choose the settings for Input A (left channel). Use the arrow keys to select each function:
,
(AT) and
(RL). The selected function will flash to show it is editable. Adjust the
setting by using the rotary control. When this step has been completed press NEXT.
Now set the remaining functions for Input A (typically the left channel). Use the arrow keys to select each
function:
(THR) and
(RG). The selected function will flash to show it is editable. Adjust the
setting by using the rotary control.
Now press NEXT.
Repeat all the previous procedures for Input B (typically the right channel).
Press ESC to quit this mode.
5 band full parametric equalization is provided on each of the Input
channels. Frequency, Gain, Bandwidth (Q) and EQ Type can be set independently for each band.
Select MODE
NEXT x2
. Press ENTER.
You are presented (see Fig.1) with the parameters available for the first of the 5 EQ bands on Input A
(typically the left channel). Use the arrow keys to select each parameter:
(default setting shows
Fig.1),
,
and
. The selected parameter will flash to show it is editable. Adjust
the setting by using the rotary control.
Edit
Noise Gate
Gate On/Off
Attack Time
Release Time
Threshold
Range
Edit
Input EQ
EQ Type
Peak -
Frequency Bandwidth
Gain
Input Equalization (Edit Menu):
Fig. 1
I N A
2 k 0 0
E Q 1
P e a k
1 . 0
-
0
.
5
Parameter & Functions Set-up Guide