Belkin UCSPRO-RM2 - Manual (Page 2)

LTO LTO
TM Safety Instructions
1
All safety and operating instructions - including those supplied with the UCS PRO - should be read before the
UCSPRO-RM2 is installed and operated. We recommend that installation be carried out by an authorized
mobile electronics installation company. Please contact your local ALTO Mobile
distributor for a list of
authorized installers in your country.
To reduce the risk of electric shock and potentially damaging the equipment, do not disassemble the
product. No user serviceable parts inside; refer servicing to qualified personnel.
These installation and operating instructions should be read in conjunction with the instructions supplied
with your Alto Mobile UCS PRO audio processor. Retain for future reference.
Avoid installing and/or using the UCSPRO-RM2 in a location that could interfere with the operation of the
vehicle or its controls, or distract the driver's attention.
The equipment should be protected from moisture, rain and heat.
The UCSPRO-RM2 is designed exclusively for use with the Alto Mobile UCS PRO audio processor. Do not
attempt to use the UCSPRO-RM2 with any other product, even if the connector plug physically fits. The pin
wiring and data protocols will not be compatible with other products and could cause damage to both
products.
This product is designed for vehicles with a 12-VOLT NEGATIVE GROUND electrical circuit. This product
is not suitable for vehicles that use a 24-Volt supply or a positive ground electrical circuit. Connection to
such circuits may permanently damage the unit.
TM