Belkin UCSPRO-RM2 User Manual
Page 16
LTO
LTO
TM
15
Parameter & Functions Set-up Guide
Select MODE
NEXT x3
. Press ENTER.
You are first presented with the parameters relating to the Low-Pass Filter (LPF) of Output 1 (OP1) - see Fig.2.
Use the arrow keys to select each parameter:
(default is
),
and
. The selected parameter will flash to show it is editable. Adjust the setting by using the rotary
control.
(Fig.2): For each filter there are 10 options plus
(i.e. filter bypass):
type (
) with 6dB, 12dB, 18dB or 24dB per octave slope
type (
) with 12dB, 18dB or 24dB per octave slope
type (
) with 12dB, 24dB or 48dB* per octave slope
Choosing the Linkwitz-Riley 48dB/octave filter will reduce the number of EQ bands available on that Output
channel.
(Fig.3): For each of the filters, the crossover point can be set between 15.6Hz and
16kHz.
Edit
Xover
Filter Type/Slope
Thru
Crossover Frequency
Signal Phase
Filter Type/Slope
Thru
Butterworth
But
Bessel
Bes
Linkwitz-Riley
LR
*
Crossover Frequency
Fig. 2
O P 1
2 k 0 0
L P F
B e s
H z
2 4
Fig. 3
O P 1
1 k 4 6
L P F
T h r u
H z
0
0