Metrohm Spectrosense - Manual (Page 30)

2 Working with the Spectrosense
26
Spectrosense, Instructions for Use
2 Working with the Spectrosense
2.1 Preparing the Spectrosense
1 Attach sleeve
Insert the electrode shaft (7) into the sleeve (6) until its O-ring
snaps into the lower groove. This might be easier if you first moisten
the O-ring of the sleeve. For sample changer applications move the
sleeve to the upper groove. This way the electrode shaft protrudes
farther into the titration vessel.
2 Attach mirror
Screw the enclosed mirror (8) onto the end of the electrode
shaft (7).
3 Connect Spectrosense to titration device
Connect the measuring output 'out' (2) with the enclosed elec-
trode cable 6.2116.020 with the measuring input 'Ind.' of your
Titrino or Titrando.
4 Power supply
• Power supply via Titrando
Connect the power supply (1) of the Spectrosense with an
MSB connection of your Titrando. Use the enclosed cable
6.2151.070.
Spectrosense
2 1
6.2
151
.07
0
6.2
11
6.0
20
Fig. 2 Titrando – Spectrosense