Metrohm 940 Professional IC Vario ONE/SeS/PP/Prep 2 - Manual (Page 35)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
940 Professional IC Vario ONE/SeS/PP/Prep 2 (2.940.1520)
￭￭￭￭￭￭￭￭ 25
4 Mounting the adsorber tube
NOTE
Depending on the eluent used, the adsorber tube (6.1609.000)
must be filled differently:
￭ For alkaline eluents or eluents with a low buffer capacity: first a
little cotton, then CO
2
adsorber material.
￭ For all other eluents: only cotton.
￭ Remove the plastic cover from the large opening of the adsorber
tube. Fill the adsorber tube and close it again using the plastic
cover.
￭ Insert the adsorber tube into the bottle cap's large opening. Fas-
ten it to the bottle cap using the SGJ clip (6.2023.020).