6 capillary and cable feed-throughs, Capillary and cable feed-throughs, Figure 8 – Metrohm 886 Prof.Thermostat/Reactor User Manual
Page 28: Connecting the leak sensor, Figure 9, Capillary feed-throughs – oven, 2) must be, Plug the leak sensor connector plug (8-2), 1) on the rear of the instrument
3.6 Capillary and cable feed-throughs
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
20
￭￭￭￭￭￭￭￭
886 Professional Thermostat (2.886.0110) / 886 Professional Reactor (2.896.0210)
1
2
3
Figure 8
Connecting the leak sensor
1
Leak sensor connection socket
Is labeled with "Leak Sensor".
2
Leak sensor connector plug
3
Leak sensor connection cable
Is firmly mounted on the rear of the instru-
ment.
3.6
Capillary and cable feed-throughs
Several openings have been integrated for feeding through capillaries and
cables. To feed through capillaries into the oven, two openings are provi-
ded, one each left and right of the oven door. Up to five capillaries can be
fed into the oven through each of the two capillary feed-throughs.
Figure 9
Capillary feed-throughs – oven
To guide capillaries to or away from the instrument or to guide them
between two instruments, use the capillary feed-throughs on top or at the