Metrohm 940 Professional IC Vario ONE/ChS/PP/LPG - Manual (Page 20)

4.1 Setting up the instrument
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12 ￭￭￭￭￭￭￭￭
940 Professional IC Vario ONE/ChS/PP/LPG (2.940.1350)
4 Installation
4.1 Setting up the instrument
4.1.1 Packaging
The instrument is supplied in highly protective special packaging together
with the separately packed accessories. Keep this packaging, as only this
ensures safe transportation of the instrument.
4.1.2 Checks
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
4.1.3 Location
The instrument has been developed for operation indoors and may not be
used in explosive environments.
Place the instrument in a location of the laboratory which is suitable for
operation, free of vibrations, protected from corrosive atmosphere, and
contamination by chemicals.
The instrument should be protected against excessive temperature fluctu-
ations and direct sunlight.
4.2 Removing the handle
The instrument is equipped with a handle in order to make it easier to
transport. The handle can be removed once the instrument is in place in
the lab.
Accessories You do not need any accessories for the following work steps.