Metrohm 746 VA Trace Analyzer - Manual (Page 25)

2 Main window
VA Database 2.0
18
Scaling of curve axes
MAIN WINDOW / Edit / Options...
The scaling of curve axes can be changed in the
appearing
OPTIONS window with the tab Scale :
X Axis Scale
The start and end value of the x axis can be
changed manually. The default settings are
made according to the method of the 746 VA
Trace Analyzer. With
Auto
enabled the lower or
upper border of the whole segment will be used
for the display.
Y Axis Scale
The start and end value of the y axis can be
changed manually. The default settings are
made according to the method of the 746 VA
Trace Analyzer. With
Auto enabled the y axis is
scaled automatically so that all measurement
points are visible. The potential range of the pre-
defined substance scale may be exceeded.
Note: The stored numerical values are displayed with automati-
cally calculated prefixes. Entries can also be done using prefixes
(m, u, n, p).
Invert orientation of y or x axis.