Banner WORLD-BEAM QS18 Universal Voltage - Manual (Page 2)

Specifications
Supply Voltage
P-MOSFET Models: 20 to 140 V ac/dc at less than 10 mA, exclusive of
load
N-MOSFET Models: 20 to 270 V ac/dc at less than 10 mA, exclusive of
load
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Output Configuration
Single Discrete Output, 100 mA load rating; N-MOSFET or P-MOSFET,
depending on model number; Light Operate or Dark Operate,
depending on model number
Output Rating
Rating: 100 mA with short circuit protection
Off-state leakage current: less than 400 µA
ON-state saturation voltage: P-MOSFET: 2.75 V; N-MOSFET: 2.5 V
Output Protection Circuitry
Protected against output short-circuit and false pulse on power up.
Latching short-circuit protection; reset by cycling power.
Delay at power up; outputs do not conduct during this time: 100 ms
max. dc, 300 ms max. ac
Output Response
Opposed mode: 16.6 ms (1 cycle at 60 Hz)
All other modes: 8.3 ms (1/2 cycle at 60 Hz)
Repeatability
1.5 ms
Indicators
2 LED indicators on sensor top:
Green solid: Power on
Green flashing: Sensor output short circuit
Amber solid: Light sensed
Amber flashing: Marginal excess gain (1 to 1.5x excess gain)
Adjustments
Diffuse, Retroreflective and Polarized Retroreflective models only: 1-
turn potentiometer Sensitivity (Gain) adjustment
Construction
ABS housing, PMMA lens, Acetal Gain Adjuster
Connections
2 m (6.5 ft) 3-conductor, 22 AWG PVC cable (300 V ac), or 150 mm (6
in) pigtail PVC cable with 4-pin threaded Micro-style connector; “C1”
suffix models: 2 m (6.5 ft) 3-conductor, 22 AWG PVC cable (600 V ac).
Environmental Rating
IEC IP67; NEMA 6; UL Type 1
1200 PSI washdown; NEMA ICS5, Annex F-2002 (PW12)
Operating Conditions
Relative Humidity: 95% @ 55 °C (non-condensing)
Temperature: Less than 140 V ac/dc: −25 °C to 70 °C (−13 °F to 158
°F) (N-MOSFET and P-MOSFET models)
140 V ac/dc or greater: −25 °C to 55 °C (−13 °F to 131 °F) (N-
MOSFET models only)
Certifications
IND. CONT. EQ.
Indicators
1. Green: Power Indicator
2. Amber: Output Indicator
3. Sensitivity (Gain) Potentiometer
WORLD-BEAM ® QS18 Universal Voltage Sensors
2 www.bannerengineering.com - tel: 763-544-3164 P/N 136003 Rev. D