Banner PT Remote Sensors - Manual (Page 4)

SP12 Series Sensors
Banner Engineering Corp. 9714 Tenth Ave. No. Minneapolis, MN 55441 Telephone: (612) 544-3164 FAX (applications): (612) 544-3573
Stainless steel models of SP12 Series modulated remote barrel sensors may be ordered with a built-in connector designed to mate
with eurofast™ quick-disconnect (QD) cables. The resultant sensor model numbers are:
SP12SELQD (emitter), and SP12SRLQD (receiver).
M ating cables are ordered separately. Cables are available in 15 foot lengths with either of two styles of mating connector. Cable
model MQDC-415 has a straight connector, and model MQDC-415RA has a right-angled connector (see drawings below). In
both models, the plug body is molded to the PVC cable for waterproof integrity. Plug contacts are gold-plated.
Dimension Drawing
Dimensional Information,
MQDC-415 Cable Dimensional Information,
MQDC-415RA Cable
SP12 Series
Sensors with Quick Disconnect (QD) Cable Option
Hookup Information, SP12 Series QD sensors
The wire colors of the MQDC Series QD cables used with the QD models of SP12 Series sensors are different from the wire colors
used on the cabled sensor models. The hookups below show connection of SP12 Series QD sensors to MAXI-AMP CD Series
modules.
*105 to 130V ac or
210 to 250V ac,
50/60Hz, depending
upon model.
To power the MAXI-
AMP module from a
dc supply, connect
+12 to 28V dc at
≥
70
mA to terminal #3
and dc common to
terminal #1.
Make no connection
to terminal #7 or #8.
SPDT
5A
Relay
Output
AC
SUPPLY
*
LED + (white)
LED - (blue)
COMMON (black)
PT - (blue)
AUX
AC
SUPPLY
*
PT + (brown)
AC Load
DC Load
Load
Common
Models with isolated solid-state contacts
LED + (white)
LED - (blue)
COMMON (black)
PT - (blue)
AUX
CD3RA
CD3RB
CD5RA
CD5RB
8
7
6
5
4
9
10
11
1
2
3
PT + (brown)
SP12SELQD
Models with electromechanical relay contacts
SP12SRLQD
CD3A
CD3B
CD5A
CD5B
8
7
6
5
4
9
10
11
1
2
3
SP12SELQD SP12SRLQD