Banner K50FL Sensor Emulator EZ-LIGHT - Manual (Page 2)

Specifications
Supply Voltage and Current
T8L models: 10 to 30V dc @ 20 mA max.
T18, M18, and K30L models: 10 to 30V dc @ 30 mA
max.
T30 models: 10 to 30V dc @ 45 mA max.
K50L, K50FL, and K80L models: 18 to 30V dc @ 45
mA max.
Indicators
Entire translucent diffuser or dome provides indication.
Green and Yellow, when connected to discrete output
of 3-wire or 4-wire sensors. For other colors, contact
Factory for availability.
Input Response Time
Indicator ON/OFF: 1 ms max.
Construction
See Models table.
Connections
K80L models: 4-pin Euro-style integral QD (Q)stand-
ard; terminal-wired models available for use with bulk
cable; compression fitting optional. Contact Factory for
cable information.
Other models: 4-pin Euro-style integral QD (Q), 6" pig-
tail QD (QP), or 4-wire, 2 m (6.5') integral cable, de-
pending on model
Environmental Rating
Rated IEC IP67. T8L not encapsulated; K80L has en-
capsulated electronics only; other models fully encap-
sulated. K30L, K50L, and K50FL QD models meet
IP69K, per DIN 40050-9. Cabled models also meet
IP69K if the cable and cable entrance are protected
from high-pressure spray.
Operating Conditions
−40° to +50° C (−40° to +122° F)
Certifications
All models: CE; K30L and K50L models: UL
Dimensions
T8L Models T18 Models M18 Models
ø16.3 mm
(0.64")
8.8 mm (0.35")
150 mm (6")
Euro-style PVC Pigtail
19.1 mm (0.75")
15. 8 mm (0.62")
M8 X 1
120037
Ø 15 mm
(0.59")
M18 x 1
Thread
33.0 mm
(1.3")
53.6 mm
(2.11")
M12 X 1
30 mm
(1.2")
23 mm
(0.9")
Ø16.5 mm
(0.65")
61 mm
(2.4")
M12 X 1
M18 X 1
T30 Models K30L Models K50L Models
M30 x 1.5
Thread
Ø 40.0 mm
(1.57")
45.0 mm
(1.77")
63.7 mm
(2.51")
Ø 15 mm
(0.59")
M12 X 1
31.0 mm
(1.22")
58.0 mm
(2.28")
30.0 mm (1.18")
16.0 mm (0.63")
M12 X 1
Max. Torque
2.25 Nm (20 in-lbf)
M22 X 1.5
50.0 mm
(1.97")
38 mm (1.50")*
20 mm (0.79")
11 mm (0.43")
M30 x 1.5
(mounting nut
included)
Internal Threads
½ - 14 NPSM
Max. Torque 4.5 Nm
(40 in-lbf)
Max. Torque 2.25 Nm
(20 in-lbf)
K50FL Models K80L Models
EZ-LIGHT™ 2-Color Indicators for Use with Sensors
2 www.bannerengineering.com - tel: 763-544-3164 P/N 121900 rev. G