Banner K50FL Sensor Emulator EZ-LIGHT - Manual

DC-Operated LED Indicators
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com .
Models* Inputs
T8LGYX7PQP PNP
T8LGYX7NQP NPN
• Polycarbonate/ABS alloy housing,
thermoplastic diffuser
• IP67
M18GYX7PQ PNP
M18GYX7NQ NPN
• Nickel-plated brass housing, thermo-
plastic diffuser
• Fully encapsulated IP67
T18GYX7PQ PNP
T18GYX7NQ NPN
• Thermoplastic polyester housing, ther-
moplastic diffuser
• Fully encapsulated IP67
T30GYX7PQ PNP
T30GYX7NQ NPN
• Thermoplastic polyester housing, ther-
moplastic diffuser
• Fully encapsulated IP67
Models* Inputs
K30LGYX7PQ PNP
K30LGYX7NQ NPN
• 22 mm threaded polycarbonate base,
translucent polycarbonate dome
• Fully encapsulated IP67, IP69K
K50LGYX7PQ PNP
K50LGYX7NQ NPN
• 30 mm threaded polycarbonate base,
translucent polycarbonate dome
• Fully encapsulated IP67, IP69K
K50FLGYX7PQ PNP
K50FLGYX7NQ NPN
• Polycarbonate base, translucent poly-
carbonate dome
• Fully encapsulated IP67, IP69K
K80LGYX7PQ PNP
K80LGYX7NQ NPN
• ABS and polycarbonate base, translu-
cent polycarbonate dome
• Electronics fully encapsulated IP67
* A QD model requires a mating cable; see 4-Pin Euro-Style Cordsets on page 3.
T8L Models: Standard pigtail QD models are listed. For integral 4-wire cable model, omit suffix QP (example, T8LGYX7P).
K80L Models: Standard 4-pin Euro integral QD connector models are listed. For terminal-wired model, omit suffix Q (example,
K80LGYX7P).
Other Models: Standard 4-pin Euro integral QD connector models are listed. For 2 m (6.5') integral 4-wire cable model, omit suffix Q
(example, M18GYX7P). For 150 mm (6") PVC pigtail with 4-pin Euro connector, replace suffix Q with QP (example, M18GYX7PQP).
Contact Factory for other colors/color combinations, including: blue, white, orange.
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This product does NOT include the self-checking redundant circuitry necessary to allow
its use in personnel safety applications. A sensor failure or malfunction can cause either an energized
or de-energized sensor output condition.
EZ-LIGHT™ 2-Color Indicators for Use with Sensors
P/N 121900 rev. G 3/10/2011
0 121900 1