Banner T18 Series - Manual

Printed in USA 01/05 P/N 121525
T18 Sensors – ac-Voltage Series
Self-contained ac-operated sensors
* Standard 2 m (6.5') cable models are listed.
• 9 m (30') cable: add suffix “W/30” (e.g., T183E W/30).
• 4-pin Micro-style QD models: add suffix “Q1” (e.g., T183EQ1). A model with a QD connector requires a mating cable. (See page 7.)
† Use polarized models when shiny objects will be sensed.
Sensing Mode Range LED Output Model*
Opposed 20 m (66')
Infrared
950 nm
– T183E
LO T18AW3R
DO T18RW3R
Retroreflective †
with Gain Control
2 m (79")
LO T18AW3L
DO T18RW3L
Polarized
Retroreflective †
Visible Red
680 nm
LO T18AW3LP
DO T18RW3LP
Diffuse
with Gain Control
300 mm (12")
Infrared
880 nm
LO T18AW3D
DO T18RW3D
Fixed-Field
25 mm (1") cutoff
LO T18AW3FF25
DO T18RW3FF25
50 mm (2") cutoff
LO T18AW3FF50
DO T18RW3FF50
100 mm (4") cutoff
LO T18AW3FF100
DO T18RW3FF100
P
Features
• Featuring EZ-BEAM ® technology, the specially-designed optics and electronics
provide reliable sensing without the need for adjustments (most models)
• “T” style plastic housing with 18 mm threaded lens mount
• Models available in opposed, retroreflective, diffuse and fixed-field modes
• Completely epoxy-encapsulated to provide superior durability, even in harsh
sensing environments to IP69K
• Innovative dual-indicator system takes the guesswork out of sensor performance
monitoring
• 20 to 250V ac (3-wire hookup); SPST solid-state switch output, maximum
load 300 mA
Models
WARNING . . . Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for
personnel protection.