Banner WORLD-BEAM QS18 Ultrasonic Sensors - Manual

Miniature Ultrasonic Sensors with TEACH-Mode Programming
Features
• Fast, easy-to-use TEACH-Mode programming; no potentiometer adjustments
• Ultra-compact housing
• One discrete output: NPN or PNP, depending on model
• Two bi-colored status LEDs
• Rugged encapsulated version for harsh environments
• Choose 2 meter or 9 meter unterminated cable, 4-pin Euro-style or 4-pin Pico-style QD
connectors (either integral or with 150 mm pigtail)
• Wide operating range of -20° to +60° C (-13° to +140° F)
• Temperature compensation
• Configurable for normally open or normally closed operation
• Fast response time (15 milliseconds)
Models
Models
Sensing
Range
TEACH Option Cable Supply Voltage Output
QS18UNA
50 mm to
500 mm
(2 in to 20
in)
Integral push button or remote
TEACH (IP67, NEMA 6P) 4-wire, 2 m (6.5
ft) cable with
shield
12-30V dc
NPN
QS18UPA PNP
QS18UNAE
Remote TEACH (epoxy-encapsula-
ted, IP68, NEMA 6P)
NPN
QS18UPAE PNP
Only standard 2 m (6.5 ft) cable models are listed. For 9 m (30 ft) shielded cable, add suffix “W/30” to the model number (e.g., QS18UNA
W/30). A model with a QD connector requires a mating cordset. For QD models:
• For 4-pin integral Euro-style QD, add suffix “Q8” (e.g., QS18UNAQ8).
• For 4-pin Euro-style 150 mm (6") pigtail QD, add suffix “Q5” (e.g., QS18UNAQ5).
• For 4-pin integral Pico-style QD, add suffix “Q7” (e.g., QS18UNAQ7).
• For 4-pin Pico-style 150 mm (6") pigtail QD, add suffix “Q” (e.g., QS18UNAQ).
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This device does not include the self-checking redundant circuitry necessary to allow its
use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
WORLD-BEAM QS18U Ultrasonic Sensors
P/N 119287 Rev. H 5/22/2013
0 119287 2