Banner T18 Series - Manual

T18 Sensors — DC-Voltage Series
Self-Contained DC-Operated Sensors
Printed in USA
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A
sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner
Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
P/N 121526 rev. A 02/08
* Standard 2 m (6.5') cable models are listed.
• 9 m (30') cable: add suffix “W/30” (e.g., T186E W/30).
• 4-pin Euro-style QD models: add suffix “Q” (e.g., T186EQ). A model with a QD connector requires a mating cable. (See page 7.)
** Use polarized models when shiny objects will be sensed.
Sensing Mode Model* Range LED Output
OPPOSED
Opposed
T186E
20 m (66')
Infrared
950 nm
–
T18SN6R NPN
T18SP6R PNP
RETRO
Retroreflective
with Gain control
T18SN6L
2 m (79")**
NPN
T18SP6L PNP
P
POLAR RETRO
Polarized
Retroreflective
T18SN6LP
Visible Red
680 nm
NPN
T18SP6LP PNP
DIFFUSE
Diffuse
with Gain control
T18SN6D
500 mm (20")
Infrared
880 nm
NPN
T18SP6D PNP
FIXED-FIELD
Fixed-Field
T18SN6FF25
25 mm (1") cutoff
NPN
T18SP6FF25 PNP
T18SN6FF50
50 mm (2") cutoff
NPN
T18SP6FF50 PNP
T18SN6FF100
100 mm (4") cutoff
NPN
T18SP6FF100 PNP
Models
Features
Featuring EZ-BEAM® technology to provide reliable sensing without the need for adjustments
(most models)
“T” style plastic housing with 18 mm threaded lens mount
Models available in opposed, retroreflective, diffuse, and fixed-field modes
Completely epoxy-encapsulated to provide superior durability, even in harsh sensing
environments rated to IP69K
Innovative dual-indicator system takes the guesswork out of sensor performance monitoring
Advanced diagnostics to warn of marginal sensing conditions or output overload
10 to 30V dc; choose SPDT (complementary) NPN or PNP outputs (150 mA max. ea.)
•
•
•
•
•
•
•