Banner WORLD-BEAM QS18 Series - Manual

Datasheet
• Easy-to-use Expert-style Static and Dynamic TEACH options, plus
Window, Light, and Dark SET, via push button or remote input
• Smart power-control algorithm to maximize performance in low-contrast
applications
• Easy push-button or remote sensor setup options:
◦ Dark-Operate/Light-Operate select
◦ Selectable 30 ms output OFF-delay
• Less than 1 millisecond output response for excellent sensing
repeatability
• Tough ABS housing is rated IEC IP67; NEMA 6
• Bright LED operating status indicators are visible from 360°
• Discrete PNP or NPN output, depending on model
• Multiple connection options available (see Models)
• Compact housing, easy barrel-mount (some models) or side-mount
installation
Model Sensing Mode Range Output Model Sensing Mode Range Output
QS18EN6LP 660 nm Visible Red
P
POLAR RETRO
Polar Retro
3.5 m (12
ft) 1
NPN QS18EN6CV15 660 nm Visible Red
CONVERGENT
Convergent
16 mm
(0.65 in)
NPN
QS18EP6LP PNP QS18EP6CV15 PNP
QS18EN6D
940 nm Infrared
DIFFUSE
Diffuse
800 mm
(31.5 in)
NPN QS18EN6CV45
43 mm
(1.7 in)
NPN
QS18EP6D PNP QS18EP6CV45 PNP
QS18EN6DB
500 mm
(19.7 in)
NPN QS18EN6FP 660 nm Visible Red
PLASTIC FIBER
Plastic Fiber
Varies by
mode and
fiber
optics
used
NPN
QS18EP6DB PNP QS18EP6FP PNP
QS18EN6W
300 mm
(11.8 in)
NPN QS18EN6DV 660 nm Visible Red
DIFFUSE
Diffuse
600 mm
(23.6 in)
NPN
QS18EP6W PNP QS18EP6DV PNP
Standard 2 m (6.5 ft) cable models are listed. To order the 9 m (30 ft) cable model, add suffix "W/30" to the cabled model number. For example,
QS18EN6FP W/30. Models with a QD connector require a mating cable.
To order a model with a 4-pin QD 150 mm (6") Euro-style pigtail, add suffix “Q5” (e.g., QS18EN6FPQ5).
To order a model with a 4-pin 150 mm (6") Pico-style pigtail, add suffix “Q” (e.g., QS18EN6FPQ).
To order a model with a 4-pin Integral Euro-style QD, add suffix “Q8” (e.g., QS18EN6FPQ8).
To order a model with a 4-pin Integral Pico-style QD, add suffix “Q7” (e.g., QS18EN6FPQ7).
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
1 Specified using BRT-84 reflector (sold separately)
WORLD-BEAM
®
QS18E Series
P/N 136564 Rev. C 8 January 2014
0 136564 1