Banner K50FL Sensor Emulator EZ-LIGHT - Manual (Page 3)

60.0
[2.36"]
35.0
[1.38"]
16.0 [0.63"]
40.0 [1.58"]
2x 5.0 [0.20"]
2x 5.0 [0.20"]
2x 5.5 [0.21"]
Ø50 [1.97"]
17.0 [0.67"]
44.6 [1.76"]
109.5 mm
(4.31")
80.8 mm
(3.18")
66.3 mm
(2.61")
26.0 mm
(1.02")
M12 X 1
65.0 mm
(2.56")
65.0 mm
(2.56")
4X 8–32 UNC
Max. Torque 1.12 Nm (10 in–lbf)
4X Ø 5.5 mm (Ø 0.22")
Max. Torque 1.12 Nm (10 in–lbf)
with supplied screws
Internal Threads ½ - 14 NPSM
Max. Torque 2.25 Nm (20 in–lbf)
Wiring
NPN Models PNP Models Wiring Key:
1 = Brown
2 = White
3 = Blue
4 = Black
Pinout
*Yellow ON = Green OFF
** This object represents the sensor Legend
T.C. = To Controller
Y = Yellow
G = Green
X = Not Used
2
3
4
1
4-Pin Euro-Style Cordsets
4-Pin M12/Euro-Style Cordsets (straight connector)
MQDC-406, 2 m (6.5')
MQDC-415, 5 m (15')
MQDC-430, 9 m (30')
4-Pin M12/Euro-Style Cordsets (right-angle connector)
MQDC-406RA, 2 m (6.5')
MQDC-415RA, 5 m (15')
MQDC-430RA, 9 m (30')
EZ-LIGHT™ 2-Color Indicators for Use with Sensors
P/N 121900 rev. G www.bannerengineering.com - tel: 763-544-3164 3