E-flite Beechcraft Bonanza 15e ARF User Manual

Page 17

Advertising
background image

17

Beechcraft Bonanza 15e ARF Assembly Manual

□

Step 6

Pass the nylon pushrod housing through the holes

in the lower right side of the firewall and fuselage

bulkheads, then through the slot and hole in the

radio tray.

□

Step 7

Adjust the tube until it is flush with the front of the

firewall then apply canopy glue to secure it at each

point where it passes through the fuselage structure.

□

Step 8

Slide a silicone keeper onto the steering cable then

insert the cable into the housing.

□

Step 9

Place the servo between the mounting rails with the

output shaft towards the front. Use the steering cable

to position the servo by inserting it into the pushrod

connector.

□

Step 10

Mark the servo mounting holes with a pencil.

Cutting a bevel on the end of the pushrod

housing will make it much easier to insert

through the holes in the fuselage bulkheads.

Advertising