E-flite Beechcraft Bonanza 15e ARF - Manual (Page 46)

46 Beechcraft Bonanza 15e ARF Assembly Manual
□
Step 6
Place the spinner backplate, propeller, washer
and nut onto the collet shaft. Space the spinner
backplate 1/16-inch from the cowling and use a
10mm wrench to tighten the nut.
□
Step 7
Set the spinner cone in place against the backplate
and center the cutouts on the propeller blades.
□
Step 8
Insert the spinner cone retaining bolt and tighten it
with a 3/32-inch hex wrench.
Belly Pan Installation
Parts Required
Fuselage Wing
Belly pan Wing bolts (2)
Tools Required
Low-tack tape Canopy glue
3/16-inch straight blade screwdriver
□
Step 1
Install the wing on the fuselage by first inserting the
leading edge tabs into the rectangular slot in the
fuselage bulkhead.