E-flite Cap 232 BP ARF - Manual (Page 18)

Hinging
Required Parts
Airframe
CA hinges (17)
Elevator (left and right)
Aileron (left and right)
Rudder
Plywood elevator joiner
Required Tools and Adhesives
Thin CA
T-pins
Straight edge
 1. Remove the covering from one elevator to
expose the slot for the plywood elevator joiner.
Slide the joiner into position and check it is
aligned with the front edge of the elevator using
a straight edge. Wick thin CA into the joint
between the joiner and elevator to secure the
joiner in position.
18