E-flite Cap 232 BP ARF - Manual (Page 35)

 4. Slide the motor mount onto the motor stick. Use
a drill and 1/16" (1.5mm) drill bit to drill a pilot
hole for the screw into the motor stick. Use the
1.5mm x 10mm screw to secure the mount to the
motor stick.
Note:.Check.that.your.motor.has.right..
thrust..The.motor.will.be.angled.towards..
the.right.when.viewed.from.the.top.of.the.
aircraft.as.shown.
Important Information About Your Brushless ESC
Make.sure.your.ESC.brake.is.programmed.
to.Off..Also,.be.sure.to.use.an.ESC.with.the.
proper.9V.cutoff.when.using.3-cell.Li-Po.packs,.
or.6V.cutoff.when.using.2-cell.Li-Po.packs.
35