E-flite Cessna 182 370 ARF - Manual (Page 18)

18
Radio Installation
Required Parts
Fuselage
Wing
Micro control connector (5)
Control connector backplate (5)
2mm x 8mm screw (8)
Aileron servo cover (2)
3" linkage (2)
Y-harness, standard 6"
Servo extension 6"
Double-sided tape (2)
Required Tools and Adhesives
Phillips screwdriver (small)
Hobby knife
Hook & loop
String
Hot glue gun
 1. Attach a micro control connector to the servo arm
for the elevator. Use the connector backplate to
secure the connector.
 2. Plug the elevator servo into the receiver and
turn on the radio. Make sure the trim has been
centered, and then attach the servo arm to the
servo as shown.