E-flite Cessna 182 370 ARF - Manual (Page 24)

24
 3. Slide the stabilizer into position. Use a ruler to
check that the distance between the stabilizer tips
and wing tips are the same. Adjust as necessary.
 4. Check that the stabilizer is parallel to the wing.
Sand the fuselage lightly to make any corrections.
 2. Snap the wing struts into position on the
wing and fuselage. Slide the fairing in the
strut into place.
Caution: Always be careful when snapping the
wing struts into place to avoid damaging this
area of the wing and fuse.
Note: The struts are functional and NOT
optional. They must be installed before flight,
ensuring that the mounts in the fuse and
wing are also secure. Failure to use the struts
securely mounted to the model could result in a
crash due to wing failure.